Topo-fy Your Rig!

Every kit is a complete creative arsenal, packed with everything you need for a one-of-a-kind topographical design. You’ll get a huge assortment of approximately 80 precision-cut straight lines in various thicknesses and 40 versatile circle shapes, giving you the power to create dynamic, flowing patterns with authentic detail. Each piece is cut from premium cast vinyl that’s tough enough for any adventure yet incredibly forgiving and easy to work with.

We believe a DIY kit should never mean compromising on quality. That’s why we use the exact same high-performance, premium cast vinyl that you’ll find in top-tier professional wrap shops. It’s the only material truly built to handle the abuse of the trail, the heat of the sun, and the test of time without peeling, shrinking, or cracking. The only difference between our kit and a professional installation is the price and the fact that you get the pride of doing it yourself.

It’s actually the best of both worlds. The kit arrives as a single, easy-to-handle sheet, but all of the individual lines and circle shapes are already precision “kiss-cut” into it. This means you don’t have to do any difficult cutting yourself—you just peel the shapes you want off the backing paper, like a high-end sticker sheet. This method gives you total creative freedom to design your own pattern without the hassle of a bulk roll.

Extremely durable. We engineered our wraps to take on the three biggest enemies of your paint: trail abuse, sun, and mud. It’s loaded with powerful UV blockers to prevent fading and keep the design looking sharp, season after season. And since the surface is non-porous, mud and grime wash right off. In short, this wrap isn’t just made to look tough—it’s built to protect your rig on every single adventure.

Great question. We designed these kits so you don’t need a professional’s toolbox to get the job done. You’ll need a heat source like a heat gun (a hairdryer may work) to make the vinyl flexible around curves, and a sharp utility or X-Acto knife for any minor trimming. To ensure a perfect, long-lasting bond, we also strongly recommend having Isopropyl alcohol and a lint-free towel handy to create a perfectly clean surface before you begin. That’s truly all you need; no other fancy equipment is required to get a professional result.

While the exact time depends on the complexity of the design you’re creating, a good estimate for most first-timers is to set aside a solid afternoon, or a few hours, for the project. It’s not something you want to rush. Our best advice is to think of it as a satisfying weekend project—put on some music, lay out all your pieces, and enjoy the process of transforming your rig with your own hands. For a few hours of your time, you’ll get a killer custom look that you can be proud of for years to come.

This is where the magic of our pro-grade vinyl really shines, so don’t panic! The material is designed to be forgiving. If you get a small bubble, the vinyl’s air-release technology allows you to simply push the trapped air out to the nearest edge. For a wrinkle, just carefully peel that section of the vinyl back up, pull it smooth, and reapply it. The adhesive is designed to be repositionable, so you can do this until it’s perfect. For any stubborn wrinkles, a quick shot of heat from your hairdryer will instantly soften the material and make it lay down perfectly flat.

Great question—proper washing is the key to keeping your wrap looking epic for years. The best and safest method is always to hand wash it using a gentle car wash soap and a soft microfiber mitt, just like you would a high-end paint job.

As for automatic car washes, stay far away from any that use brushes. The abrasive bristles can scratch the vinyl and, more importantly, can catch an edge and cause it to lift. If you need to use an automatic wash, make sure it is a touchless system. Even then, be careful with high-pressure wands. Keep the nozzle at least a few feet from the surface and avoid aiming it directly at the seams or edges of the wrap. Treat it with a little care, and it will continue to protect your rig and look awesome on every adventure.

Not at all—in fact, protecting your paint is one of the vinyl wrap’s biggest benefits. We use high-quality vinyl with specialized adhesives designed for clean, damage-free removal from solid, factory-cured paint jobs. When it’s time to sell or simply change your style, the wrap comes off to reveal the well-preserved paint.